Notifications
Clear all
PrusaSlicer 2.7.3 and MK4 bed size error
I have a project that is 210x210 exactly. Last November I loaded the STL and sliced/printed without issue over a dozen times. Because of a material change I needed to load the file for a fresh gcode version. I now get the error that "an object is outside the print area". I verified the bed size as 210x250 so it appears that a project can't equal bed size? Testing setting the bed at 211x250 but seems to be a bug maybe?
Publié : 05/04/2024 12:16 pm
Topic starter
answered:
RE: PrusaSlicer 2.7.3 and MK4 bed size error
Same at 2.7.4... worse, won't even attempt to center.
Publié : 05/04/2024 12:58 pm
Topic starter
answered:
RE: PrusaSlicer 2.7.3 and MK4 bed size error
So my project printed without issue. This to me is a bug as the stated volume is listed as 250 x 210 x 220, not 249 x 209 x 219.
Publié : 05/04/2024 10:50 pm