PrusaSlicer 2.7.3 and MK4 bed size error
 
Notifications
Clear all

PrusaSlicer 2.7.3 and MK4 bed size error  

  RSS
Barry Robbins
(@barry-robbins)
Eminent Member
PrusaSlicer 2.7.3 and MK4 bed size error

I have a project that is 210x210 exactly.  Last November I loaded the STL and sliced/printed without issue over a dozen times.  Because of a material change I needed to load the file for a fresh gcode version.  I now get the error that "an object is outside the print area".  I verified the bed size as 210x250 so it appears that a project can't equal bed size?  Testing setting the bed at 211x250 but seems to be a bug maybe?

 

 

Opublikowany : 05/04/2024 12:16 pm
Barry Robbins
(@barry-robbins)
Eminent Member
Topic starter answered:
RE: PrusaSlicer 2.7.3 and MK4 bed size error

Same at 2.7.4... worse, won't even attempt to center.

Opublikowany : 05/04/2024 12:58 pm
Barry Robbins
(@barry-robbins)
Eminent Member
Topic starter answered:
RE: PrusaSlicer 2.7.3 and MK4 bed size error

So my project printed without issue.  This to me is a bug as the stated volume is listed as 250 x 210 x 220, not 249 x 209 x 219.

Opublikowany : 05/04/2024 10:50 pm
Share: