Notifications
Clear all

Moon Lithophane Lamp with Prusament Vanilla PLA White  

  RSS
mrwsl
(@mrwsl)
Active Member
Moon Lithophane Lamp with Prusament Vanilla PLA White

I can't get the lamp printed. I started by slicing the stl with the default settings in PrusaSlicer 2.5.0 and constantly got a clogged nozzle. A cold pull didn't help much. The stand I could easily print, but not the lamp itself. At some point, no filament is extruded. I tried to increase the hot end temperature to 225 °C without any success. I suspect this model is quite demanding due to the many retracts, but still the prusa mk3s should be able to finish it, shouldn't it? Any tips?

Posted : 24/11/2022 12:54 pm
Neophyl
(@neophyl)
Famed Member
RE: Moon Lithophane Lamp with Prusament Vanilla PLA White

Who knows, as you haven't given anyone anything to work with.  'Standard settings', what standard settings ?  There are several.  Like what layer height are you slicing at ?  Low layer heights are much more prone to issues.  

If you want actual help then please save your project from Prusa Slicer, use File>Save Project As.  That will save a .3mf file.  The 3mf project contains the model but also every setting you are slicing with, any modifiers, how its placed, etc etc.  It is a complete snapshot that allows more rapid debugging of what you are using.  People can slice and look through the previews with all the options.  

Be aware though that you need to ZIP up a 3mf file for the forum to allow you to attach it.  The forum is very limited in its allowed file types.

Posted : 24/11/2022 1:57 pm
mrwsl
(@mrwsl)
Active Member
Topic starter answered:
RE: Moon Lithophane Lamp with Prusament Vanilla PLA White

My bad, of course. I thought I attached the 3mf file but it is too large for uploading. I cut the model now and exported the 3mf again now. Hopefully that is the wanted information.

Posted : 24/11/2022 2:01 pm
Robin
(@robin)
Honorable Member
RE: Moon Lithophane Lamp with Prusament Vanilla PLA White

I printed it twice on my MK3S/MMU2 with Verbatim PLA using the classic perimeter engine and everything on default using "0.2mm Quality" / "Verbatim PLA" / "MK3S & MK3S+ MMU single" build in profiles without any problems...

https://www.printables.com/model/23859-designer-lithophane-moon-lamp/comments/254227#

 

If at first you don't succeed, skydiving is not for you.

Posted : 24/11/2022 2:24 pm
Robin
(@robin)
Honorable Member
RE: Moon Lithophane Lamp with Prusament Vanilla PLA White

damn edit time.... not correct, I set perimeters to 5.

If at first you don't succeed, skydiving is not for you.

Posted : 24/11/2022 2:32 pm
Share: