Notifications
Clear all
0.8 Nozzle - over or under extrusion?
Hi
After changing to a bigger nozzle...
It printed well, but not this PETG CF. is it over extruding?
Extr. Mult. = 1.03
Retraction length = 0.8
Retr. Speed = 35 mm/s
Anyone?
Thanks a million
This topic was modified před 1 day 2 times by Kopplog
Napsal : 03/12/2024 1:34 pm
RE: 0.8 Nozzle - over or under extrusion?
Try drying your filament, those look like vapor bubbles from moisture.
Napsal : 03/12/2024 3:56 pm