X-Axis Motor Printed Part
During assembly I noticed that the X-axis printed part (gap for the belt) is not large enough for the GT2-16 pulley. What I mean is, even when pushed all the way down onto the x-axis motor, there is still going to be a TON of rubbing done by the belt at the front end of the part. Picture for reference. Any ideas besides sanding?
RE: X-Axis Motor Printed Part
top left hand corner there is an adjustment screw to move it up and down otherwise contact prusa
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: X-Axis Motor Printed Part
via the live chat
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: X-Axis Motor Printed Part
The pully is mounted the wrong way round!
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.