Notifiche
Cancella tutti
Recommended print settings for Colorfabb varioshore TPU with a 0.6 nozzle
I'll be attempting to speed up my print time with Colorfabbs varioshore TPU. Just wondering if anybody has any advice regarding print/filament settings?
Printer specs: Mini+ / 0.6 nozzle / bondtech dual extruder
I've tried changing the MVS to 2.5 mm 3/s as recommended here - https://help.prusa3d.com/en/article/max-volumetric-speed_127176
but I've noticed that in the preview max MVS speed in 1.35mm 3/s.
Other settings:
Temp: 230 C
Layer height: 0.3
Speed for print moves: 30mm/s
Postato : 02/02/2022 10:26 pm