Recommended print settings for Colorfabb varioshore TPU with a 0.6 nozzle
 
Notifications
Clear all

Recommended print settings for Colorfabb varioshore TPU with a 0.6 nozzle  

  RSS
Vicurus
(@vicurus)
New Member
Recommended print settings for Colorfabb varioshore TPU with a 0.6 nozzle

I'll be attempting to speed up my print time with Colorfabbs varioshore TPU. Just wondering if anybody has any advice regarding print/filament settings?

Printer specs: Mini+ / 0.6 nozzle / bondtech dual extruder 

I've tried changing the MVS to 2.5 mm 3/s  as recommended here - https://help.prusa3d.com/en/article/max-volumetric-speed_127176

but I've noticed that in the preview max MVS speed in 1.35mm 3/s.

 Other settings:

Temp: 230 C

Layer height: 0.3

Speed for print moves: 30mm/s

Napsal : 02/02/2022 10:26 pm
Share: