Notifications
Clear all
Even with full supports, brig
Hi,
I have an issue with the recessed MicroSD slot in my design. The case is printed with the front on the print bed, so the MicroSD slot is suspended in mid-air with a lot of bridging needed.
I've already disabled "Don't Support Bridges" in PrusaSlicer. This has improved the print a lot, but the "bottom" of the MicroSD slot is still quite bad. Is there anything (in PrusaSlicer, or even in the Fusion360 design) that I could do to improve this?
Design files and description at https://www.prusaprinters.org/prints/58527-maxduino-case-for-tzxduino-maxduino-board-from-pro
Ce sujet a été modifié il y a 4 years par Ed
Publié : 05/03/2021 1:35 pm
Topic starter
answered:
RE: Even with full supports, bridging a MicroSD card slot produces bad results. Any suggestions?
(sorry, I could not edit topic name anymore)
Publié : 05/03/2021 1:46 pm