RE: Printer Failing to extrude (Clicking)
Yes spin through settings
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Printer Failing to extrude (Clicking)
The problem seems to be fixed. The filament might be bad. I wont make this Problem solved cause Who knows, maybe it was just a lucky coincidence. I’ll still try again with the PLA and if it breaks again then I can say for sure that the PLA filament is bad.
Oh, and also the Extruder Motor spins freely when Turned by hand and has no errors when turning it through settings.
RE: Printer Failing to extrude (Clicking)
dont see how bad fillament can cause it to click please let us know how it goes with pla
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
Have you dried your filament? Back pressure messed up by steam production can cause a lot of trouble.
Also go through the procedures for a partial clog, a cold pull to start with.
Cheerio,
RE: Printer Failing to extrude (Clicking)
I'm Guessing it can either a) While printing mess up the print and/or while heating up it gets stuck in the Hotend and slowly creates a clog that then makes the Extruder Skip cause it can't push any more filament. Currently, it's working fine with PETG. It is printing without any issues for some prints.
RE: Printer Failing to extrude (Clicking)
What do you mean by drying filament? Like putting it into an oven? 😀
Look up threads here about drying filament ...
You can use an oven at a pinch but it must be accurately controlled, preferably an electric fan oven.
Most experienced users dry filament as matter of course, many use specialised filament dryers but domestic food dehydrators are often better 'though they may need (printed) adaptors.
Cheerio,
RE: Printer Failing to extrude (Clicking)
Drying filament for PLA seems waaay too overkill. Plus, the thread continues! For some reason, I don't know how. I tried printing again with PLA, and it works perfectly for some apparent reason. Like if it didn't have a single problem at all. It's going on its 4th print in a row without any hitches. I am baffled yet happy that I possibly saved 30 Eur for Filament. I'm hoping for the best.
RE: Printer Failing to extrude (Clicking)
Your printer hated you and didn't want to print the day it didn't work lol
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models