Notifiche
Cancella tutti
dirty hot end
When my 3D printer mini+ is working, the melt of filaments will seep out from the hot end (the upper end of the nozzle), and after accumulation, it will drip onto the workpiece, which will seriously affect the printing quality. How to solve this problem?
Postato : 11/06/2022 6:44 pm
RE: dirty hot end
Review nozzle installation instructions. Don't have a Mini but I believe there's a piece of PTFE tube involved which may need to be replaced/refitted.
Postato : 11/06/2022 7:20 pm
RE: dirty hot end
Rebuild the hot end per Prusa's instructions:
https://help.prusa3d.com/guide/how-to-replace-a-heaterblock-heatbreak-mini-mini_122769
https://help.prusa3d.com/guide/how-to-replace-a-hotend-ptfe-tube-mini-mini_119449
Get a silicone sock to cover the heatblock so burnt filament won't stick.
Regards,
Mark
Postato : 11/06/2022 10:33 pm