Notifiche
Cancella tutti
My 0.2 mm nozzle test failure with ender 3 v2 and prusa slicer.
I tried 0.2 mm nozzle with my ender 3 v2.
have you ever tried this? I would be very happy if you give me advice.
here all my settings which is diffirent from prusa' s 0.12 mm default layer height profile.
layer height = 0.08
first layer height = 0.12
solid layers top = 5 bottom = 5
all extrusion widths = 0 (this means automatic)
nozzle dia = 0.2
this is my print with 0.4 mm nozzle
this is my print with 0.2 mm nozzle
Postato : 24/06/2022 4:00 pm