Looking for profile for Craftbot Flow IDEX
 
Notifications
Clear all

Looking for profile for Craftbot Flow IDEX  

  RSS
Fisheye_3d
(@fisheye_3d)
Member
Looking for profile for Craftbot Flow IDEX

Hello, I have unsuccessfully been trying to make a working profile for the Craftbot Flow IDEX XL for months now, I've searched craftbot forums, community's, prusaslicer facebook/discord, Ive spent countless hours trying different start/end gcode, I have a working Cura profile and tried coping over the post processing gcode needed with there firmware but keep gettings gcode error on printer when it checks it before print. Wondering if anyone has a working profile for this printer or knows how to adapt that can help. I really need the paint feature of prusaslicer.  TIA. 

Opublikowany : 10/07/2022 7:32 am
towlerg
(@towlerg)
Noble Member
RE: Looking for profile for Craftbot Flow IDEX

I have a working Cura profile

Can't you take start and end codes from that?

Opublikowany : 10/07/2022 2:57 pm
Fisheye_3d
(@fisheye_3d)
Member
Topic starter answered:
RE: Looking for profile for Craftbot Flow IDEX

Im not sure if its the start/end gcode or post processing to change the gcode, Craftbot gcode is different. 

Opublikowany : 10/07/2022 4:35 pm
polishx3
(@polishx3)
New Member
RE: Looking for profile for Craftbot Flow IDEX

https://github.com/polishx3/Craftbot-Prusaslicer

 

appreciate feedback for the above profile

Opublikowany : 09/08/2022 11:51 am
Theo Coetzee
(@theo-coetzee)
Member
RE: Looking for profile for Craftbot Flow IDEX

Hi polishx3

Just started using your profile. Thank you. Works for me so far.

I hacked together a bed texture for positioning parts. It may not be super accurate, but is good enough for me.

Opublikowany : 26/05/2023 3:50 pm
Share: