How reduce elephants foot worked in Prusa slicer
Which part of the slicer setting is responsible for eliminating elephants foot? Im attempt to reproduce that configuration on my other slicer for a different machine. But first I need to find it.
Best Answer by Tim Weston:
Hi,
In PrusaSlicer's 'Print Settings' tab, make sure to select the 'Advanced' or 'Expert' mode. There will then be a sub-tab visible called 'Advanced'. In there you will find the 'Elephant foot compensation' value at the bottom of the 'Slicing' section.
Cheers,
Tim
RE: How reduce elephants foot worked in Prusa slicer
Hi,
In PrusaSlicer's 'Print Settings' tab, make sure to select the 'Advanced' or 'Expert' mode. There will then be a sub-tab visible called 'Advanced'. In there you will find the 'Elephant foot compensation' value at the bottom of the 'Slicing' section.
Cheers,
Tim
RE: How reduce elephants foot worked in Prusa slicer
There's also the magnifying glass icon on the top of the window that you can use to search for settings.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...