Notifications
Clear all
RE: Weird first layer pattern
Any ideas?
Yes, that's one of these things:
- Mesh bed levelling "failed" and set the nozzle too close to the build plate.
- Extrusion Multiplier or first layer temperature is too high, causing too much filament flow and a similar effect to the nozzle being too close
In the end, the nozzle is pressing into the laid down filament, causing such patterns.
Posted : 20/06/2025 3:38 pm
1 people liked
Topic starter
answered:
RE: Weird first layer pattern
Seems to have resolved itself after a reprint
Posted : 23/06/2025 10:58 pm