Notifications
Clear all
Ringing? or wave problems on the first few mm off any print
Hey guys,
I sometimes have these artifacts on my prints. I tried to lower the bed temp to 75°C and it got a bit better but I can not go any lower...
What´s weird is that I used the same extruder, settings, and material from the same supplier (Fiberlogy PETG) just in a different color and the problem did not occur.
I´m not sure what to call these artifacts, and neither does the support, so I don´t know what to Google...
Thanks for your help!!
Posted : 25/04/2024 9:19 am