Notifications
Clear all
Quick tip: Wipe tower failure fix
Hey just a quick tip. I was 5 hours into a 12 hour print and my wipe tower failed. I have had this happen in the past and glue sticked it back in place with limited success. I couldn't do that this time. I was going to trash the print, because random filament was getting all over the print. My wife suggested using painters tape. I was able to match the height and it worked perfectly. The tape was perfect. It's soft enough for the nozzle to dip into if you don't get the height exactly right.
Just thought I would pass this along since it saved my print and could help others.
strato
Publié : 21/06/2024 5:41 pm