Avisos
Vaciar todo
Manuals on greasing, ... maintenance
I only found this page on greasing the coupler pins:
But is or are there also other manuals on how to grease other parts, rods, on how to check belt-tension...
I'm almost sure there must be but I seem to miss these. Any hint someone?
Respondido : 08/02/2024 1:42 am
RE: Manuals on greasing, ... maintenance
https://help.prusa3d.com/article/regular-printer-maintenance-xl_401237
Cheerio,
Respondido : 08/02/2024 5:18 am
RE: Manuals on greasing, ... maintenance
It looks like being partially copied from the MK3. See paragraph about the belt.
Respondido : 08/02/2024 6:09 am
Topic starter
answered:
RE: Manuals on greasing, ... maintenance
THX
I was clearly searching in the wrong sections
Respondido : 08/02/2024 9:15 am
Topic starter
answered:
RE: Manuals on greasing, ... maintenance
I find it strange that they mention acetone should not be used on the textured sheet.
For the MK3-machines it was actually adviced to do a acetone-swipe every month or two, on the textured sheet, if I recall well.
Respondido : 08/02/2024 9:17 am