Benachrichtigungen
Alles löschen
White gets dirty with black filament
Purge volume is at 800mm for black to white, im pretty sure the nozzle gets dirty while it crosses near the black, any solution to this? lower my hot end temp? it's at 200c should I try 180? 190?
Veröffentlicht : 16/05/2024 6:19 pm
Themenstarter answered:
RE: White gets dirty with black filament
Fixed it, black filament bled into white while it was cooling down
Veröffentlicht : 18/05/2024 4:06 am