Notifications
Clear all

White gets dirty with black filament  

  RSS
Hopztr
(@hopztr)
Member
White gets dirty with black filament

Purge volume is at 800mm for black to white, im pretty sure the nozzle gets dirty while it crosses near the black, any solution to this? lower my hot end temp? it's at 200c should I try 180? 190?

Black lines between letters

Posted : 16/05/2024 6:19 pm
Hopztr
(@hopztr)
Member
Topic starter answered:
RE: White gets dirty with black filament

Fixed it, black filament bled into white while it was cooling down

Posted : 18/05/2024 4:06 am
Share: