Notifiche
Cancella tutti
Strange noise from MMU2s
Dear all,
I have this issue when I switch ON my prusa i3 Mk3s + MMU2S unit.
Already tried:
- Checked assembly guide if I miss something
- Checked all cables
- Checked if any filament is blocked somewhere
- Resetted MMU2 board
Any idea ?
Questa discussione è stata modificata 5 years fa da Savage21
Postato : 27/05/2019 11:19 am
RE: Strange noise from MMU2s
I have similar noise , but a little stronger.
Postato : 05/02/2021 1:40 pm
RE: Strange noise from MMU2s
That's just the normal homing of the idler.
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
Postato : 05/02/2021 2:05 pm
RE: Strange noise from MMU2s
Although the original post is almost 2 years old; When I turned on my MMU2S for the first time, I also thought for a moment that something was wrong. But indeed it's the homing of the idler.
Postato : 03/03/2021 7:23 am