Change in temperature behaviour and LOTS of stringing
Hey guys,
I recently experience a LOT of stringing with PETG and PLA/Wood Filaments on my MK3S.
Simultaneously, I got Hotend Temperature Runaway errors on the settings that worked perfectly for a year beforehand. I had to change the cooling setting down to 30% from originally 50%.
In order to now get halfway acceptable PETG prints I had to reduce the hotend temperature down from 225° to 200°, and the results are still far from satisfying. However, PLA still prints almost perfectly at only 190°.
I have adjusted and reset all the slicer settings and printed a lot of benchmark parts, and even still my prints are still unsatisfying.
I use no Z-Hop and standard settings.
I am starting to become frustrated, do you have any idea what to look for? I thought of cleaning the nozzle, however PLA still prints fine.
Thanks in advance