Strange banding artifact in print
Hi all,
I finished assembling my mk3 a few days ago and have started some test printing but I am getting a strange blobbing/banding artifact randomly. Please see pictures.
Does anyone know what could be causing this? The print is in ultrafine detail Slic3r, hatchbox pla.
Thanks!
Re: Strange banding artifact in print
Read up on extruder linearity correction calibration.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Re: Strange banding artifact in print
Maybe a zipper line. Your start point is the same on each layer and little bit of ooze is deposited there. Maybe try random start points on each layer?
Neal
Re: Strange banding artifact in print
OP really needs to elaborate on what the specific issue being addressed. I originally thought it was a concern about the moire-type patterning, but now can see it might be that rough layer near the top (at right in pics).
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Re: Strange banding artifact in print
Hey ya gave a place to look and chances are he'll need that link later. Myself...I'm still fighting my "get a bigger hammer" instincts.
Neal.
Re: Strange banding artifact in print
Myself...I'm still fighting my "get a bigger hammer" instincts.
Hammer-schmammer, what do they teach you kids these days?
All you need is a roll of duct tape and a can of WD-40. 
That's "MISTER Old Fart" to you!
Re: Strange banding artifact in print
[quoteHammer-schmammer, what do they teach you kids these days?
All you need is a roll of duct tape and a can of WD-40. ][/quote]
Shows what you know. Duct tape and WD-40 are for AFTER the hammer.
Neal
P.S. I still drop a bit of Marvel's Mystery Oil in my carburetor to keep my engine de-gunked and a drop of lemon juice in the battery if its acting a little sluggish.
Re: Strange banding artifact in print
Shows what you know. Duct tape and WD-40 are for AFTER the hammer.
Not if you're doing it right. 😉
That's "MISTER Old Fart" to you!