Filament dried 50c for 6 hours.
Default setting for PETG.
Almost acts like the filament slows or stops...
Best Regards
Randall
RE: Filament dried 50c for 6 hours.
I have had a couple rolls of PETG do this. Have you tired a different roll?
--------------------
Chuck H
3D Printer Review Blog
RE: Filament dried 50c for 6 hours.
Sadly yes, same thing with all.
RE: Filament dried 50c for 6 hours.
Partial nozzle blockage?
RE: Filament dried 50c for 6 hours.
You can take a look at the settings on this page to see if they help:
RE: Filament dried 50c for 6 hours.
I'd try a different nozzle myself. I'll bet it's either clogged or damaged. Short of another nozzle, try some cleaning filament and a temp 5C above the hottest material you printed with.
RE: Filament dried 50c for 6 hours.
FWIW - Recommendations for drying PETG are more like 65C from what I've found.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan