Notifications
Clear all
Filament dried 50c for 6 hours.
Default setting for PETG.
Almost acts like the filament slows or stops...
Best Regards
Randall
Napsal : 14/03/2022 10:47 pm
RE: Filament dried 50c for 6 hours.
I have had a couple rolls of PETG do this. Have you tired a different roll?
--------------------
Chuck H
3D Printer Review Blog
Napsal : 25/03/2022 9:26 pm
Topic starter
answered:
RE: Filament dried 50c for 6 hours.
Sadly yes, same thing with all.
Napsal : 26/03/2022 6:05 am
RE: Filament dried 50c for 6 hours.
Partial nozzle blockage?
Napsal : 26/03/2022 12:32 pm
1 lidem se líbí
RE: Filament dried 50c for 6 hours.
You can take a look at the settings on this page to see if they help:
Napsal : 22/04/2022 6:17 pm
RE: Filament dried 50c for 6 hours.
I'd try a different nozzle myself. I'll bet it's either clogged or damaged. Short of another nozzle, try some cleaning filament and a temp 5C above the hottest material you printed with.
Napsal : 04/05/2022 4:14 pm
1 lidem se líbí
RE: Filament dried 50c for 6 hours.
FWIW - Recommendations for drying PETG are more like 65C from what I've found.
Napsal : 04/05/2022 5:21 pm
1 lidem se líbí