X and Z have offset while printing
 
Avisos
Vaciar todo

X and Z have offset while printing  

  RSS
sravan.s
(@sravan-s)
New Member
X and Z have offset while printing

Dear all,

I recently bought a MK2 original. I tried printing the calibration cube and found that rather than 20mm , the X was having 19.7mm and Z is 20.3mm.
I really dont know how to calibrate the same to get 20mm accurate or atleast near to that. Please help me on this

Respondido : 12/01/2018 11:34 am
Compartir: