Avisos
Vaciar todo

Vibration noises, maintenance  

  RSS
sheetzam
(@sheetzam)
Active Member
Vibration noises, maintenance

It would be awesome to have a guide to maintaining the i3 Mk2. I've watched several videos, but one from the man himself would be great.

It would also be nice to have a guide to running down and fixing the many different vibration noises which this model may create over time.

Respondido : 07/03/2017 3:14 am
david.z
(@david-z)
Eminent Member
Re: Vibration noises, maintenance

I agree. I have had my printer for about 9 months now, and while it is still working fine, the noise and vibration has gotten pretty severe at times. There is vibration that seems to be occurring on the Y-axis, but I haven't been able to track down what is causing it. If I push down slightly on the print bed, it stops, but as soon as I let go, it comes back. I tried moving the bearings around and tightening all the screws and lubricating the bearings, but it didn't help. Any ideas on how to better track this down?

Respondido : 11/03/2017 1:37 pm
Pat Z
(@pat-z)
Active Member
Re: Vibration noises, maintenance

Much agreed, I would love to have something like this. It would greatly slow down "debugging" time. On another note, this has helped a lot of my problems. https://all3dp.com/common-3d-printing-problems-3d-printer-troubleshooting-guide/

Respondido : 14/03/2017 2:29 am
Compartir: