Notifications
Clear all
Upgrading MK2/S and MK2.5/S to MK2.5S+ - problem with overhangs
Hello
I'm printing the parts to upgrade my mk2s to mk2.5S+ but I'm having some issues with overhangs. I'm using Prusament PETG, default settings in prusaslicer for Prusament PETG and I have tried also to reduce the printing speed to 85% but without much success. I think Prusa parts doesn't need supports, but I'm finding hard to solve this without them. Can someone help me to understand which parameters should I adjust to solve this?
Posted : 01/12/2022 3:19 pm