Notifications
Clear all

Problems with cooling since upgrade  

  RSS
selejanlau
(@selejanlau)
Active Member
Problems with cooling since upgrade

I’ve assembled the kit and started to print the benchy it started well but the part is not cooled as it should be

 

Publié : 02/02/2020 3:31 pm
BillC
(@billc)
Reputable Member
RE: Problems with cooling since upgrade

Can you show the completed upgrade, with a close up of the fan/shroud positioning? What was your upgrade path? MK2 ->MK2.5, MK2S ->MK2.5, MK2S ->MK2.5S etc.,?

What material were you printing and which plate? Temps?

 

Bill
Tagaytay City, Philippines
Founder member of Philippines Prusa Printer Owners FB Group
Sponsor Pillars of God Academy in Bacoor

Publié : 02/02/2020 11:04 pm
selejanlau
(@selejanlau)
Active Member
Topic starter answered:
RE: Problems with cooling since upgrade

@billcampbell

My upgrade path was mk2s to mk2.5s. I was printing pla at 200 °C and bed at 60 °C, plate was powder coated spring steel sheet 

Publié : 03/02/2020 7:32 am
dolorescole1943
(@dolorescole1943)
New Member
RE: Problems with cooling since upgrade

When thermostat problems develop, they are rarely dramatic events with sparks flying, or where smoke alarms sound. Most thermostat malfunctions cause subtle or sudden changes in the performance of your cooling system. 

mcdvoice
Publié : 14/05/2020 7:44 am
cwbullet
(@cwbullet)
Membre
RE: Problems with cooling since upgrade

@dolorescole1943

Unless I touch the wires with metal, I rarely see sparks.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 11/05/2021 1:42 am
Partager :