Problems with cooling since upgrade
I’ve assembled the kit and started to print the benchy it started well but the part is not cooled as it should be
RE: Problems with cooling since upgrade
Can you show the completed upgrade, with a close up of the fan/shroud positioning? What was your upgrade path? MK2 ->MK2.5, MK2S ->MK2.5, MK2S ->MK2.5S etc.,?
What material were you printing and which plate? Temps?
Bill
Tagaytay City, Philippines
Founder member of Philippines Prusa Printer Owners FB Group
Sponsor Pillars of God Academy in Bacoor
RE: Problems with cooling since upgrade
@billcampbell
My upgrade path was mk2s to mk2.5s. I was printing pla at 200 °C and bed at 60 °C, plate was powder coated spring steel sheet
RE: Problems with cooling since upgrade
When thermostat problems develop, they are rarely dramatic events with sparks flying, or where smoke alarms sound. Most thermostat malfunctions cause subtle or sudden changes in the performance of your cooling system.
RE: Problems with cooling since upgrade
@dolorescole1943
Unless I touch the wires with metal, I rarely see sparks.
--------------------
Chuck H
3D Printer Review Blog