Just cant get this to print ?  

Just cant get this to print ?

Hi Guys,

I have had my Mini for a month now and i am producing some great prints.

I am having a problem with just one model from this project

https://www.thingiverse.com/thing:3223118

I have printed several of these eggs already, without problems.

I have already sucessfully printed the egg, the transporter and 2 of the cars, but i am having huge problems with Car01.

I have sliced it in the Prusaslicer 2.2.1 at 0.1 layer, PLA and 15% infil

Things i have tried so far are :-

Raising Z hight

Lowering Z Hight

trying with both Gyroid and Rectilinear infil (this helped with anouther model)

With 'Detect Thin Wall' on and off

Slowing the print down

Moving the print to different locations on the bed

I have even tried different PLA in case it was my Yellow PLA it didnt like.

Really thouroughly cleaned the bed between prints

What happens is it fails on the first layer, wont stay on the bed (or the nozzel collects it) ?

I would realy appreciate any help or suggestions

Thanks a lot guys, my grandson really wants this egg

S