Best Adhesion for Satin Powder-Coated Sheet?  

scrubber

Scrub and clean the bed with soap and water.  I use a good coconut scrubber.  

Posted by: @dennis-st-john

Hello All,

I just ordered and received the Satin Powder-Coated Sheet for my Mini upon recommendation of the Prusa sales rep.  However, I am having a very difficult time with build plate adhesion on the powder coated sheet.  Would anyone have any advice or recommendations I could try?  And yes, I've gone through the first layer calibration, etc.  Thanks in advance for any help!

Also, the satin sheet is thinner, so you will have to adjust your first layer/live Z to more negative numbers.

I agrere

My second thing would be to adjust your Z offset.  It is essential also.  

Posted by: @fuchsr

Also, the satin sheet is thinner, so you will have to adjust your first layer/live Z to more negative numbers.

Thank you!

Thank you for your replies and advice, all!  I will utilize these tips and advice as much as possible and give another try!  I believe I also saw in a video where Josef was cleaning the satin powder-coated sheet with Isopropyl Alcohol.  Is that still recommended?

RE: Best Adhesion for Satin Powder-Coated Sheet?

A good wipe with plenty of 91%+ IPA between prints. Every now and then, or whenever it's needed, wash with hot water and fragrant-free dish washing soap.