Prusa Mini X-axis self test always failing, but still able to print after reboot
 
Notifications
Clear all

Prusa Mini X-axis self test always failing, but still able to print after reboot  

  RSS
koen V.
(@koen-v)
New Member
Prusa Mini X-axis self test always failing, but still able to print after reboot

Hello,

 
I am encountering following issue since day 1:
 
Issue:
1) Cold booting the printer
2) Not conducting a self-test
3) Start printing, X-axis will not move during a print, , i hear a clicking sound at the beginning, but the extruder is not moving.  
 
workaround 1:
1) Cold booting the printer
2) Conducting a self-test always fails for the X-axis, i hear a clicking sound, but the extruder is not moving.
3) I press the reset button, ignoring the other tests.
4) I can now start printing, X-axis will move during a print.
 
workaround 2:
1) Cold booting the printer
2) Manually move the extruder over the X-axis via settings >> Move Axis >> move X
3) Conducting a self-test always now also passes for the X-axis, the extruder is now moving over the X-axis.
4) Every repetition of the self-test now passes.
5) I can now start printing, X-axis will move during a print  
 
Please find a link below to 2 videos uploaded via WeTransfer demonstrating this issue.
 

--

Met vriendelijke groeten,
Kind regards,
Koen Verbeeck
Posted : 01/02/2021 1:27 pm
Lautaro Martin
(@lautaro-martin)
Member
RE: Prusa Mini X-axis self test always failing, but still able to print after reboot

Buenas noches

 

Podrás cargar los vídeos con los problemas y soluciones de nuevo??

Posted : 06/12/2023 3:14 am
Share: