Notifications
Clear all
Prusa Mini X-axis self test always failing, but still able to print after reboot
Hello,
I am encountering following issue since day 1:
Issue:
1) Cold booting the printer
2) Not conducting a self-test
3) Start printing, X-axis will not move during a print, , i hear a clicking sound at the beginning, but the extruder is not moving.
workaround 1:
1) Cold booting the printer
2) Conducting a self-test always fails for the X-axis, i hear a clicking sound, but the extruder is not moving.
3) I press the reset button, ignoring the other tests.
4) I can now start printing, X-axis will move during a print.
workaround 2:
1) Cold booting the printer
2) Manually move the extruder over the X-axis via settings >> Move Axis >> move X
3) Conducting a self-test always now also passes for the X-axis, the extruder is now moving over the X-axis.
4) Every repetition of the self-test now passes.
5) I can now start printing, X-axis will move during a print
Please find a link below to 2 videos uploaded via WeTransfer demonstrating this issue.
--
Met vriendelijke groeten,
Kind regards,
Koen Verbeeck
Napsal : 01/02/2021 1:27 pm
RE: Prusa Mini X-axis self test always failing, but still able to print after reboot
Buenas noches
Podrás cargar los vídeos con los problemas y soluciones de nuevo??
Napsal : 06/12/2023 3:14 am