ma bobine PETG Jayo part en biais dans mon boitier polymaker
Je ne comprends pas pourquoi ma bobine PETG Jayo part en biais
C'est très désagréable de plus cela a l'air de forcer sur le filament .
Si quelqu'un pouvait m'aider, je lui en serais reconnaissant.
ci dessous un lien vers une video qui sera bien plus parlante .
https://drive.google.com/file/d/1kLqs7p1pNyo0Fx0UjUoviqggl59KUXQC/view?usp=sharing
RE: ma bobine PETG Jayo part en biais dans mon boitier polymaker
Sorry, the file you have requested does not exist. Make sure that you have the correct URL and that the file exists.
make sure to properly share files on the google drive to allow to anyone to view it.
See my GitHub and printables.com for some 3d stuff that you may like.
RE:
English translation:
My Jayo PETG spool is coming out at an angle in my Polymaker case. I don't understand why my Jayo PETG spool is coming out at an angle. It's very annoying, and it seems to be putting pressure on the filament. If anyone could help me, I would be grateful. Below is a link to a video that will be much more informative.
This may be suspicious, being a new user's first post in the wrong language forum and not saying anything about the Mini in the text. The link may have been taken down.
The French language forum may be a better place if you are legit, and please provide more information.
Ceci peut être suspect, car il s'agit du premier message d'un nouvel utilisateur sur un forum mal écrit et le texte ne mentionne rien sur la Mini. Le lien a peut-être été supprimé. Le forum francophone est peut-être plus adapté si vous êtes sérieux, et merci de fournir plus d'informations.
Regards,
Mark
RE: ma bobine PETG Jayo part en biais dans mon boitier polymaker
Desolé j 'avais supprimé par megarde la dite video dans google drive .
via le lien ci dessus vous pouvez normalement la visualisé si ce n est pas le cas faite le moi savoir .
Par avance merci .
RE: ma bobine PETG Jayo part en biais dans mon boitier polymaker
Okay thanks no probleme .