Firmware 5.1.2+13478 not booting up
Hello everyone,
i updated my Prusa MINI with the latest firmware (5.1.2+13478) but it is not booting up anymore. I tried to reflash with the same Firmware - MINI_english-german_firmware_5.1.2.bbf - but it is still not booting or showing anything.
On my display it only shows this:
Any ideas on what can cause this or how i can fix this?
Best Answer by shingdoh:
I do have the same problem. There is a github issue about it: Issue #3629 · prusa3d/Prusa-Firmware-Buddy (github.com)
For some people a hard reset worked. For me it did not, so i had to downgrade to 5.1.0 to use my printer. https://help.prusa3d.com/article/firmware-updating-mini-mini_124784
RE:
I do have the same problem. There is a github issue about it: Issue #3629 · prusa3d/Prusa-Firmware-Buddy (github.com)
For some people a hard reset worked. For me it did not, so i had to downgrade to 5.1.0 to use my printer. https://help.prusa3d.com/article/firmware-updating-mini-mini_124784
RE:
hard reset was not possible - downgrade to 5.1.0 worked perfectly! Thank you.
RE: Firmware 5.1.2+13478 not booting up
Try factory reset on 5.1.0, and remove all files from the pendrive and write new firmware file only
See my GitHub and printables.com for some 3d stuff that you may like.