Clear all

Esun PLA & PETG Print Settings  

New Member
Esun PLA & PETG Print Settings


So I have recently just bought 2 Prusa Mini's and am having a few issues with printing, quality and stringing etc. Prusament prints perfectly with the presets but since I don't have easy access to it I have to use the next best option which is Esun. Can anyone share their print and filament settings for PLA and PETG?

Thank you 🙂

Posted : 19/03/2021 6:37 pm
Illustrious Member
RE: Esun PLA & PETG Print Settings

There are Esun presets in Prusa Slicer - in the drop down menu.


Posted : 20/03/2021 6:09 am
Reputable Member
RE: Esun PLA & PETG Print Settings

Esun PLA prints fine with generic PLA profile while PLA+ needs 5 degrees more

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Posted : 20/03/2021 7:44 am
Estimable Member
RE: Esun PLA & PETG Print Settings

I've used two colors of the eSun PETG.  For Solid Black, I'm running the PrusaSlicer Generic PETG print profile.  For eSun Silver, I found it printed better with nozzle temps 5 degrees higher than the generic profile.

Posted : 20/03/2021 1:16 pm
Estimable Member
RE: Esun PLA & PETG Print Settings

Generic pla/petg profiles in prusaslicer are really good profiles, use them to print a temptower test to perfectly tune the working temps.


Posted : 20/03/2021 4:18 pm