English
Forums
English forum
Original Prusa MK4S
Assembly and first prints troubleshooting
Input shaper and high flow nozzle time of prints are taking longer
 
Notifications
Clear all

Input shaper and high flow nozzle time of prints are taking longer  

    Last Post
  RSS
meathead
 meathead
(@meathead)
Eminent Member
Input shaper and high flow nozzle time of prints are taking longer

I am not sure what I am doing wrong here...  But in the slicer settings when selecting the input shaper or HF profiles and then slicing a part my print time calculation is increasing.

Print settings:

0.10mm FAST DETAIL

Printer selections - Print time after slice:

MK4S 0.4 Nozzle - 1h16m

MK4S HF0.4 Nozzle - 1h45m

MK4S input shaper 0.4 Nozzle - 1h45m

MK4S input shaper HF 0.4 Nozzle - 1h43m

I think I have something configured wrong.

Thanks much!

Posted : 20/06/2025 3:31 pm
meathead
 meathead
(@meathead)
Eminent Member
Topic starter answered:
RE:

Disregard the post as the input shaper profiles are actually for the MK4 and not the MK4S  

Posted by: @meathead

I am not sure what I am doing wrong here...  But in the slicer settings when selecting the input shaper or HF profiles and then slicing a part my print time calculation is increasing.

Print settings:

0.10mm FAST DETAIL

Printer selections - Print time after slice:

MK4S 0.4 Nozzle - 1h16m

MK4S HF0.4 Nozzle - 1h45m

MK4S input shaper 0.4 Nozzle - 1h45m

MK4S input shaper HF 0.4 Nozzle - 1h43m

I think I have something configured wrong.

Thanks much!

 

Posted : 20/06/2025 4:03 pm
  All forum topics
  Previous Topic
Next Topic  
Share: