RE: Buddy3D Camera update
Any chance I can get the file too? Also asking me for requesting access in google
thanks in advanced!
RE:
I found the files on my PC you can download them here
https://1drv.ms/u/c/3107e663de31eb2b/Efm4lDuNWg1IhlBPGUB1RkgBOM0UVscjn8W-JV6r_TbcQw?e=zl1utE
I'm not sure who owns the Google Drive, but indeed asking for authentication and to request access. Inspecting the included JSON file in the Onedrive link, it points to https://storage.googleapis.com/prusa3d-connect-prod-6168-connect-niceboy-ota-prod/ which lists the available tar files.
e.g. https://storage.googleapis.com/prusa3d-connect-prod-6168-connect-niceboy-ota-prod/cam-3.0.4.tar
I connected with support, due to solid greenlight on my Buddy3D Camera, and it not scanning the generated QR code, nor will the reset (1s) or factory reset (4s) work. They would not provide the link to download the firmware (which is when I came across this thread), and instead submitted a new report and will be sending me another Camera.
RE: Buddy3D Camera update
No idea if all Buddy3D cams got an update or only the Core One Cam
I just got the announcement from the cam that it is upgrading now firmware 3.1.0 is on it
Does anyone know the improvements? So black and white is already fixed now I finally have color
RE: Buddy3D Camera update
I have got 3.1.0 on my buddy3D
RE: Buddy3D Camera update
I just checked, and mine is on v3.1.0 now. No idea when that happened.
Changelog was published here: https://prusaconnect.sleekplan.app/changelog?type=t674d9c2d47e2d
RE: Buddy3D Camera update
See this discussion https://forum.prusa3d.com/forum/buddy3d/buddy3d-camera-firmware-3-1-0
RE: Buddy3D Camera update
How to i stream over lan?
- Camera stream over the same local network
RE: Buddy3D Camera update
The new Prusa app for iOS is out. Live streaming on the local network works, but the user interface is quite cumbersome.
RE: Buddy3D Camera update
Updated Camera to 3.1.0 using a MicroSD Card. Both the new Camera (same issue occurred with soft bricking) and original camera, successfully updated and connected to Wi-Fi after about a minute.
RE: Buddy3D Camera update
Hi
You can also use a app like vlc and stream it on your pc using the URL in the app: rtsp://<camera-ip-address>:554/live
RE: Buddy3D Camera update
Updated Camera to 3.1.0 using a MicroSD Card. Both the new Camera (same issue occurred with soft bricking) and original camera, successfully updated and connected to Wi-Fi after about a minute.
Do you mind sharing where you downloaded the latest FW binary from? I've asked support for it but they told me they don't have a copy to share yet.
RE: Buddy3D Camera update
here https://connect-ota.prusa3d.com/
rename the tar file to cus_update_ota.tar worked for me.