Z leveling enforced

Último Mensaje

RSS

BillberryC

(@billberryc)

New Member

Z leveling enforced

Hi, finished assembly of my MK3S a week ago and did several prints using PLA and PETG working good. But since yesterday evening I always get a Z leveling enforced error (front right point - number 7). performed again the preflight check, Pinda ajustment and selftest but the problem remains the same if I start to print ... Please provider me some hints what I can do.

Thank you very much

Gerhard

Respondido : 16/06/2020 8:02 am

Gordon W

(@gordon-w)

Reputable Member

RE: Z leveling enforced

Gerhard,

You have posted this in the section for the Mini, although you will find some people who have both machines and can help you, you will probably get a better response if you post in the Mk3 section.

Good luck finding a fix for the problem.

Gordon

Respondido : 16/06/2020 9:08 am

Neophyl

(@neophyl)

Illustrious Member

RE: Z leveling enforced

https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-hardware-firmware-and-software-help/unable-to-calibrate-after-error-z-levelling-enforced/#post-152964

Respondido : 16/06/2020 9:39 am

Estadísticas del Foro

565 Foros

63.6 K Temas

446.3 K Respuestas

23 En línea

69 K Miembros

Último Mensaje: Build Plate Temperature Uniformity (Issue?) Nuestro miembro más reciente: twh344 Últimos Mensajes Publicaciones sin leer Etiquetas

Iconos del foro: El foro no contiene publicaciones sin leer El foro contiene publicaciones sin leer

Iconos de los Temas: No respondidos Respondido Activo Popular Fijo No aprobados Resuelto Privado Cerrado