Deutsch
Foren
Mitglieder
JDre357
Aktivität
 
Benachrichtigungen
Alles löschen
JDre357
JDre357
Gruppe: Registriert
Beigetreten: 2017/01/05
Active Member
1
Profil Aktivität
I’m don’t know how to monitor the pinda temp value in the gc...

Im Forum Others (Archive)

 Vor 7 years
I’m interested to see if anyone has advice on how to fix thi...

Im Forum Others (Archive)

 Vor 7 years
I home all the axes, heat my bed to 60ºC and extruder to 150...

Im Forum Others (Archive)

 Vor 7 years
I had been having this problem for quite a while and actuall...

Im Forum Others (Archive)

 Vor 7 years
Bed Leveling / First Layer Issue

Im Forum Others (Archive)

 Vor 7 years
I had a similar issue with my MK3 extruder squeaking tonight...

Im Forum Others (Archive)

 Vor 7 years
I tried to compensate for this in my starting script. I even...

Im Forum Others (Archive)

 Vor 7 years
I’ve adjusted the live z. The print is great on the second t...

Im Forum Others (Archive)

 Vor 7 years
Poor First Layer Quality on First Attempt

Im Forum Others (Archive)

 Vor 7 years
I was just looking at my failed cylinder when I noticed that...

Im Forum Others (Archive)

 Vor 8 years
Looking at the images from the tubes and the headphone rest,...

Im Forum Others (Archive)

 Vor 8 years
I did check the cable harness. I put my extruder in the posi...

Im Forum Others (Archive)

 Vor 8 years
The print that failed a couple weeks ago had a large base an...

Im Forum Others (Archive)

 Vor 8 years
Tall Prints Fail

Im Forum Others (Archive)

 Vor 8 years
Oh ok. I'll give slic3r a shot and see how it compares. Than...

Im Forum Others (Archive)

 Vor 8 years
I appreciate the advice guys. By increasing my retraction di...

Im Forum Others (Archive)

 Vor 8 years
Are there certain parameters in S3D I can adjust that would ...

Im Forum Others (Archive)

 Vor 8 years
Stringing Problem

Im Forum Others (Archive)

 Vor 8 years
Teilen: