Prusa3D Forum

Notifications

Clear all

chrischin

Grupa: Zarejestrowany

Dołączył: 2018/12/15

Trusted Member

	Turns out I was putting the second temperature commands afte... In forum PrusaSlicer	3 months temu
	Start G-code Omitted from Sliced G-code 2.8.0 In forum PrusaSlicer	3 months temu
	Thanks so much for the recommended settings and detailed exp... In forum PrusaSlicer	8 months temu
	Interesting. I've read through several of these posts but ju... In forum PrusaSlicer	8 months temu
	If I print with no infill the gap issue is mostly gone (thir... In forum PrusaSlicer	8 months temu
	Extrusion gap near seam/deretraction In forum PrusaSlicer	8 months temu
	Actually, I tried this again and it does fix it. I was getti... In forum PrusaSlicer	11 months temu
	Ah, I see what you're saying about the infill, but one thing... In forum PrusaSlicer	11 months temu
	Thanks. But why wouldn't the gap exist at the outer edge, un... In forum PrusaSlicer	11 months temu
	Overhang Gap In forum PrusaSlicer	11 months temu
	Confirmed, Prusa docs say this about the thin walls setting:... In forum PrusaSlicer	2 years temu
	But the seam looks as smooth as can be on the Classic settin... In forum PrusaSlicer	2 years temu
	Print just finished with 0.6mm nozzle QUALITY profile and al... In forum PrusaSlicer	2 years temu
	Thanks. I did also notice some z artifacts on my print, whic... In forum PrusaSlicer	2 years temu
	How could Arachne possibly be the default when it's so unrel... In forum PrusaSlicer	2 years temu
	Attached zipped PrusaSlicer Project file Box-Arachne... In forum PrusaSlicer	2 years temu
	Seams Issue with Arachne In forum PrusaSlicer	2 years temu
	@edg-engineering-2 I think I just accepted these gaps and di... In forum How do I print this? (Printing help)	4 years temu
	@chocki Nice! Have you considered a volcano hot end upgrade?... In forum How do I print this? (Printing help)	5 years temu
	@bobstro In the before gcode I turned down the "M221 S95" co... In forum How do I print this? (Printing help)	5 years temu

Strona 1 / 3 Następny

Statystyki Forum

566 Fora

63.2 K Tematy

444.2 K Posty

22 Online

68.1 K Członkowie

Ostatni Post: Poll - Should Prusa make the $299 MK4S -> Core One voucher available to all who purchsed the MK4S or MK4 to MK4S upgrade kit. Najnowszy użytkownik:: etiennep Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Ikony tematu: Not Replied Odwpowiedzi Aktywny Gorący Przyklejony Unapproved Rozwiązany Private Zamknięte