Prusa3D Forum

Benachrichtigungen

Alles löschen

chrischin

Gruppe: Registriert

Beigetreten: 2018/12/15

Trusted Member

	Turns out I was putting the second temperature commands afte... Im Forum PrusaSlicer	Vor 2 months
	Start G-code Omitted from Sliced G-code 2.8.0 Im Forum PrusaSlicer	Vor 2 months
	Thanks so much for the recommended settings and detailed exp... Im Forum PrusaSlicer	Vor 8 months
	Interesting. I've read through several of these posts but ju... Im Forum PrusaSlicer	Vor 8 months
	If I print with no infill the gap issue is mostly gone (thir... Im Forum PrusaSlicer	Vor 8 months
	Extrusion gap near seam/deretraction Im Forum PrusaSlicer	Vor 8 months
	Actually, I tried this again and it does fix it. I was getti... Im Forum PrusaSlicer	Vor 11 months
	Ah, I see what you're saying about the infill, but one thing... Im Forum PrusaSlicer	Vor 11 months
	Thanks. But why wouldn't the gap exist at the outer edge, un... Im Forum PrusaSlicer	Vor 11 months
	Overhang Gap Im Forum PrusaSlicer	Vor 11 months
	Confirmed, Prusa docs say this about the thin walls setting:... Im Forum PrusaSlicer	Vor 2 years
	But the seam looks as smooth as can be on the Classic settin... Im Forum PrusaSlicer	Vor 2 years
	Print just finished with 0.6mm nozzle QUALITY profile and al... Im Forum PrusaSlicer	Vor 2 years
	Thanks. I did also notice some z artifacts on my print, whic... Im Forum PrusaSlicer	Vor 2 years
	How could Arachne possibly be the default when it's so unrel... Im Forum PrusaSlicer	Vor 2 years
	Attached zipped PrusaSlicer Project file Box-Arachne... Im Forum PrusaSlicer	Vor 2 years
	Seams Issue with Arachne Im Forum PrusaSlicer	Vor 2 years
	@edg-engineering-2 I think I just accepted these gaps and di... Im Forum How do I print this? (Printing help)	Vor 4 years
	@chocki Nice! Have you considered a volcano hot end upgrade?... Im Forum How do I print this? (Printing help)	Vor 5 years
	@bobstro In the before gcode I turned down the "M221 S95" co... Im Forum How do I print this? (Printing help)	Vor 5 years

Seite 1 / 3 Nächstes

Forums-Statistiken

559 Foren

63.1 K Themen

443.9 K Beiträge

21 Online

68.1 K Mitglieder

Letzter Beitrag: Prusament PETG Matte Black Unser neuestes Mitglied: etiennep Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen