Prusa3D Forum

Notifications

Clear all

airscapes

Grupa: Zarejestrowany

Dołączył: 2021/01/19

Eminent Member

	Ok, with External perimeter first unchecked we have a usable... In forum PrusaSlicer	2 months temu
	Gcode for a retraction and move this is without print extern... In forum PrusaSlicer	2 months temu
	Did not really help..see attached.. Did notice that I have p... In forum PrusaSlicer	3 months temu
	Interesting thought. That is the value used in S3d for non p... In forum PrusaSlicer	3 months temu
	Ok thank! here is the project which I assume has all the se... In forum PrusaSlicer	3 months temu
	What the SEAM is going on with this? In forum PrusaSlicer	3 months temu
	I take it all back.. it does work. Set perimeter to 15mm/S ... In forum PrusaSlicer	1 year temu
	Old Post new user .. one thing I really wanted to do was to ... In forum PrusaSlicer	1 year temu
	DING DING DING DING!!! That is the problem! 🙂 I would assu... In forum PrusaSlicer	5 years temu
	So where does it end the travel.. same as the image I showed... In forum PrusaSlicer	5 years temu
	@joantabb I updated the stl to be .4 width.. this issue I am... In forum PrusaSlicer	5 years temu
	@joantabb Any chance you can test this? In forum PrusaSlicer	5 years temu
	@joantabb I have attached an STL of the same part with some... In forum PrusaSlicer	5 years temu
	@neophyl Ture, it can be a problem if you had mixed models. ... In forum PrusaSlicer	5 years temu
	Making the slicer obey Skirt .02mm from part is the simple f... In forum PrusaSlicer	5 years temu
	Hi Joan! Thanks for looking at this but I think you will nee... In forum PrusaSlicer	5 years temu
	Forgive me, this works as I describe in S3d and I use it all... In forum PrusaSlicer	5 years temu
	I am totally confused.. what do you actually want? A brim is... In forum PrusaSlicer	5 years temu
	I am just starting to use PS myself and had some issues with... In forum PrusaSlicer	5 years temu
	@joantabb Retraction at 1mm on first print of the and second... In forum PrusaSlicer	5 years temu

Strona 1 / 2 Następny

Statystyki Forum

585 Fora

68.2 K Tematy

477.9 K Posty

13 Online

75.9 K Członkowie

Ostatni Post: What filament dryer to use? Najnowszy użytkownik:: ArtiVIVO Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Ikony tematu: Not Replied Odwpowiedzi Aktywny Gorący Przyklejony Unapproved Rozwiązany Private Zamknięte