Prusa3D Forum

Notifications

Clear all

airscapes

Skupina: Registrovaný

Přidal se: 2021/01/19

Eminent Member

	Ok, with External perimeter first unchecked we have a usable... In forum PrusaSlicer	před 10 months
	Gcode for a retraction and move this is without print extern... In forum PrusaSlicer	před 10 months
	Did not really help..see attached.. Did notice that I have p... In forum PrusaSlicer	před 10 months
	Interesting thought. That is the value used in S3d for non p... In forum PrusaSlicer	před 10 months
	Ok thank! here is the project which I assume has all the se... In forum PrusaSlicer	před 10 months
	What the SEAM is going on with this? In forum PrusaSlicer	před 10 months
	I take it all back.. it does work. Set perimeter to 15mm/S ... In forum PrusaSlicer	před 2 years
	Old Post new user .. one thing I really wanted to do was to ... In forum PrusaSlicer	před 2 years
	DING DING DING DING!!! That is the problem! 🙂 I would assu... In forum PrusaSlicer	před 5 years
	So where does it end the travel.. same as the image I showed... In forum PrusaSlicer	před 5 years
	@joantabb I updated the stl to be .4 width.. this issue I am... In forum PrusaSlicer	před 5 years
	@joantabb Any chance you can test this? In forum PrusaSlicer	před 5 years
	@joantabb I have attached an STL of the same part with some... In forum PrusaSlicer	před 5 years
	@neophyl Ture, it can be a problem if you had mixed models. ... In forum PrusaSlicer	před 5 years
	Making the slicer obey Skirt .02mm from part is the simple f... In forum PrusaSlicer	před 5 years
	Hi Joan! Thanks for looking at this but I think you will nee... In forum PrusaSlicer	před 5 years
	Forgive me, this works as I describe in S3d and I use it all... In forum PrusaSlicer	před 5 years
	I am totally confused.. what do you actually want? A brim is... In forum PrusaSlicer	před 5 years
	I am just starting to use PS myself and had some issues with... In forum PrusaSlicer	před 5 years
	@joantabb Retraction at 1mm on first print of the and second... In forum PrusaSlicer	před 5 years

Stránka 1 / 2 Další

Fórum Statistiky

598 Fóra

71.3 K Témata

500.4 K Příspěvky

13 Online

82.1 K Uživatelé

Poslední Příspěvek: Spooljoin - Can't retract old filament? Nový Uživatel: Martin Lenza Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed