Prusa3D Forum

Notifications

Clear all

airscapes

Grupa: Zarejestrowany

Dołączył: 2021/01/19

Eminent Member

	Ok, with External perimeter first unchecked we have a usable... In forum PrusaSlicer	11 months temu
	Gcode for a retraction and move this is without print extern... In forum PrusaSlicer	11 months temu
	Did not really help..see attached.. Did notice that I have p... In forum PrusaSlicer	11 months temu
	Interesting thought. That is the value used in S3d for non p... In forum PrusaSlicer	11 months temu
	Ok thank! here is the project which I assume has all the se... In forum PrusaSlicer	11 months temu
	What the SEAM is going on with this? In forum PrusaSlicer	11 months temu
	I take it all back.. it does work. Set perimeter to 15mm/S ... In forum PrusaSlicer	2 years temu
	Old Post new user .. one thing I really wanted to do was to ... In forum PrusaSlicer	2 years temu
	DING DING DING DING!!! That is the problem! 🙂 I would assu... In forum PrusaSlicer	5 years temu
	So where does it end the travel.. same as the image I showed... In forum PrusaSlicer	5 years temu
	@joantabb I updated the stl to be .4 width.. this issue I am... In forum PrusaSlicer	5 years temu
	@joantabb Any chance you can test this? In forum PrusaSlicer	5 years temu
	@joantabb I have attached an STL of the same part with some... In forum PrusaSlicer	5 years temu
	@neophyl Ture, it can be a problem if you had mixed models. ... In forum PrusaSlicer	5 years temu
	Making the slicer obey Skirt .02mm from part is the simple f... In forum PrusaSlicer	5 years temu
	Hi Joan! Thanks for looking at this but I think you will nee... In forum PrusaSlicer	5 years temu
	Forgive me, this works as I describe in S3d and I use it all... In forum PrusaSlicer	5 years temu
	I am totally confused.. what do you actually want? A brim is... In forum PrusaSlicer	5 years temu
	I am just starting to use PS myself and had some issues with... In forum PrusaSlicer	5 years temu
	@joantabb Retraction at 1mm on first print of the and second... In forum PrusaSlicer	5 years temu

Strona 1 / 2 Następny

Statystyki Forum

598 Fora

71.8 K Tematy

503.9 K Posty

15 Online

83.1 K Członkowie

Ostatni Post: INDX - Nozzle diameters Najnowszy użytkownik:: Print2Many Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Ikony tematu: Not Replied Odwpowiedzi Aktywny Gorący Przyklejony Unapproved Rozwiązany Private Zamknięte