Notifications
Clear all
airscapes
airscapes
Group: Registered
Joined: 2021/01/19
Eminent Member
2
I take it all back.. it does work. Set perimeter to 15mm/S ...

In forum PrusaSlicer

3 months ago
Old Post new user .. one thing I really wanted to do was to ...

In forum PrusaSlicer

3 months ago
DING DING DING DING!!! That is the problem! 🙂 I would assu...

In forum PrusaSlicer

4 years ago
So where does it end the travel.. same as the image I showed...

In forum PrusaSlicer

4 years ago
@joantabb I updated the stl to be .4 width.. this issue I am...

In forum PrusaSlicer

4 years ago
@joantabb Any chance you can test this?

In forum PrusaSlicer

4 years ago
@joantabb I have attached an STL of the same part with some...

In forum PrusaSlicer

4 years ago
@neophyl Ture, it can be a problem if you had mixed models. ...

In forum PrusaSlicer

4 years ago
Making the slicer obey Skirt .02mm from part is the simple f...

In forum PrusaSlicer

4 years ago
Hi Joan! Thanks for looking at this but I think you will nee...

In forum PrusaSlicer

4 years ago
Forgive me, this works as I describe in S3d and I use it all...

In forum PrusaSlicer

4 years ago
I am totally confused.. what do you actually want? A brim is...

In forum PrusaSlicer

4 years ago
I am just starting to use PS myself and had some issues with...

In forum PrusaSlicer

4 years ago
@joantabb Retraction at 1mm on first print of the and second...

In forum PrusaSlicer

4 years ago
Sorry.. Also am I missing the Edit button or does it vanish ...

In forum PrusaSlicer

4 years ago
Here is the 3mf file.. printer is a Makergrear

In forum PrusaSlicer

4 years ago
Single extrude wall and Slicers path choice ..

In forum PrusaSlicer

4 years ago
.3 reduced the time spent ironing as would be expected and t...

In forum PrusaSlicer

4 years ago
New to PS but do this all the time in S3D and PS has the sam...

In forum PrusaSlicer

4 years ago
Space Between ironing passes

In forum PrusaSlicer

4 years ago
Page 1 / 2
Share: