Extruder clicking
After 1 month of great prints - in the middle of a print, the extruder stopped extruding filament and continued printing without filament
I unloaded and reloaded filament (PETg) cleared the bowden tube, heated the hot end to 285 for 30 minutes - cleared all filament
Reloaded the PETg the extruder is clicking - I adjusted the 2 set screws, but still clicking
Any ideas
RE: Extruder clicking
https://help.prusa3d.com/article/clogged-nozzle-core-one-core-one-l-xl-mk4-s-mk3-9-s_411823
I am from the Czech Republic, I don't speak English, I translate using Google Translate
RE: Extruder clicking
Thank you for the reply
I have done that used the needle and tried to push filament through into the top of the nozzle- but I am not seeing the filament coming through the gears and the clicking is quite loud I cannot figure out why the print stopped pushing filament but kept on printing as if the filament was still flowing I am very happy with this printers preformance
RE: Extruder clicking
You've got a clogged nozzle mate. Can be a pain to resolve, especially with CHT (HF) nozzles.
RE: Extruder clicking
Thanks gb160 - I'll set to it