Notifications
Clear all

Prusa Mini & Octoprint  

Page 2 / 2
  RSS
Sunny
(@sunny-2)
New Member
RE: Prusa Mini & Octoprint

I have the same issue. I already bought a cable for data transfer ( https://www.amazon.de/gp/product/B07LG8J7YZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) but it does not help.

Do you have other suggestions for me what i can try?
Printer: Prusa Mini+
Firmware: 3.4.3
Raspberry Pi 4 with the latest stable Octo Print

Publié : 11/01/2022 6:20 pm
Bern Statch
(@bern-statch)
Active Member
RE: Prusa Mini & Octoprint

@Sunny this is the wrong cord, this is for data transfer only, you need to get the 2 way cord. You will notice that the catual wire on the cord is a bit larger than the standard cords.

Publié : 11/01/2022 7:50 pm
Sunny
(@sunny-2)
New Member
RE: Prusa Mini & Octoprint

@bern-statch thanks for your reply.
So i need a usb 3.0 cable which can make full-duplex data transfer?
Or is a usb 2.0 cable with half-duplex even possible?

Publié : 12/01/2022 5:06 pm
Sunny
(@sunny-2)
New Member
RE: Prusa Mini & Octoprint

Thanks for that. Now i orderd a half-dublex cable from Amazon Basic and this works fine. 

Publié : 14/01/2022 2:44 pm
MysDawg
(@mysdawg)
Estimable Member
RE: Prusa Mini & Octoprint

 

Posted by: @sunny-2

Thanks for that. Now i orderd a half-dublex cable from Amazon Basic and this works fine. 

Can you link the cable here? I'm looking for a longer cable. I'm presently using 6" cable and I need a cable length of about 18"

Publié : 15/01/2022 2:12 am
Page 2 / 2
Partager :