Notifications
Clear all

After Market nozzle  

  RSS
Doriann
(@doriann)
Eminent Member
After Market nozzle

I know this just released but do we have instructions on how to change to an after market nozzle yet? I have a nozzle X I will want to throw on my MK4 when it is delivered. 

Best Answer by tg.creative:

You'll be able to switch to the Nozzle X but not yet. The V6 adapter is not available yet. They mentioned yesterday during Prusa Live that it will be coming soon and be "very affordable". The XL is shipping with it as a bonus but no dice on the MK4

Publié : 30/03/2023 5:54 pm
cwbullet
(@cwbullet)
Membre
RE: After Market nozzle

I reviewed the manual and did not see it, but then again, I skimmed it.  

 

https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk4_en_1_01.pdf#_ga=2.34468449.1778026877.1680177342-1888730576.1676910453

 

You might find it.  It might not be released until the kit assembly instructions are finished.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 30/03/2023 6:00 pm
Doriann a aimé
Shushuda
(@shushuda)
Estimable Member
RE: After Market nozzle

I also didn't find it, but if it uses the same hotend and adapter as XL, then I assume the instructions will be very similar:

https://help.prusa3d.com/guide/how-to-install-the-nextruder-v6-nozzle-adapter-xl_404659

Publié : 30/03/2023 6:07 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

I'll look in to it when I get home from work, Thank you for the link. I ended up ordering the fully assembled kit as I didn't want to wait for a kit lol. 

Publié : 30/03/2023 6:09 pm
tg.creative
(@tg-creative)
Membre
RE: After Market nozzle

You'll be able to switch to the Nozzle X but not yet. The V6 adapter is not available yet. They mentioned yesterday during Prusa Live that it will be coming soon and be "very affordable". The XL is shipping with it as a bonus but no dice on the MK4

Publié : 31/03/2023 1:10 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

Thank you! I missed out  on the live and haven't had a chance to watch the replay yet. 

Publié : 31/03/2023 2:11 pm
PrussianTomasUSA
(@prussiantomasusa)
Eminent Member
RE: After Market nozzle

I ordered the 3.9 upgrade kit. I hope to add the adapter when available to my order. They are supposed to start shipping the Upgrade kits in June 2023. The only bummer is that I had to pay the total price instead of a small preorder price. I use a lot of hardened and CHT nozzles and found no use for the old standard nozzles. I want to keep at least 3 of the adapter ready to go.

Publié : 01/04/2023 8:10 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

Based on a video I just saw the adaptors will be available next week. 

 

 

Source:  Everything you need to know about the new Prusa MK4!

Publié : 01/04/2023 8:51 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

Adapters are available now

https://www.prusa3d.com/product/nextruder-v6-nozzle-adapter/

 

Publié : 03/04/2023 3:35 pm
voxelmaniam a aimé
voxelmaniam
(@voxelmaniam)
Active Member
RE: After Market nozzle

My MK4 is due to be delivered today. From what Joe says it will be delivered with a 0.4 mm nozzle. I've been using 0.6 mm nozzles on my MK3S+ since Thomas Sanladerer's great YT video about the advantages. Thanks for the link to the adapter but I'd really prefer a straight up Nextruder nozzle selection. Do you have any links for those?

 

Publié : 04/04/2023 2:53 pm
Vous a aimé
addohm
(@addohm)
Estimable Member
RE: After Market nozzle

Let me know if you find others.  I need an 0.6mm and an 0.8mm.

Publié : 04/04/2023 6:24 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

I haven't seen any yet, with that said I'm sure they are in development or they will add it to the site in the next couple of weeks (just a guess though)

Publié : 05/04/2023 3:42 am
Fred
 Fred
(@fred-7)
Membre
RE: After Market nozzle

Can you buy the whole hotend already or will you be able to buy it? I haven't found much yet...

Publié : 06/04/2023 8:35 pm
Doriann
(@doriann)
Eminent Member
Topic starter answered:
RE: After Market nozzle

 

Posted by: @fred-7

Can you buy the whole hotend already or will you be able to buy it? I haven't found much yet...

I haven't seen anything yet about a whole new hotend. After re-watching Thomas's video I saw they mentioned the .6 nozzle and they will ship with the XL but also become available soon. 

Publié : 06/04/2023 8:53 pm
voxelmaniam
(@voxelmaniam)
Active Member
RE: After Market nozzle

So $52.51 later, $29.99 for the Nextruder V6 Nozzle Adapter and $22.52 for cheapest available shipping, I'll be able to start printing with a 0.6 mm nozzle today. This really should have been included with the printer given the lack of availability of alternate Nextruder nozzles. Typical early adopter beef.

Publié : 07/04/2023 2:43 pm
Zakoplex et addohm ont aimé
addohm
(@addohm)
Estimable Member
RE:

Yeah I have a lot of those.  I knew better and I was rightfully hesitant at first because it was a matter of losing my place in line for the XL.  I shouldn't have swapped my order for MK4.  Lesson learned.

Truth be told though, most of the same beefs I have with my MK4 will exist for the XL.

Posted by: @voxelmaniam

So $52.51 later, $29.99 for the Nextruder V6 Nozzle Adapter and $22.52 for cheapest available shipping, I'll be able to start printing with a 0.6 mm nozzle today. This really should have been included with the printer given the lack of availability of alternate Nextruder nozzles. Typical early adopter beef.

 

Publié : 07/04/2023 11:29 pm
voxelmaniam
(@voxelmaniam)
Active Member
RE: After Market nozzle

Nextruder Nozzles are now available. Only $27.90 each plus $22.88 shipping to the good ol' USofA. Now if the Nextruder Heater Block assemblies would become available I could bundle all the parts I want. Note also that the Nextruder V6 adapter is now out of stock.

Publié : 19/04/2023 7:01 pm
ManelTo
(@manelto)
Estimable Member
RE: After Market nozzle

I have added the 0.25 and the 0.6 to the MK4 kit. So I don't pay the postage.

Posted by: @voxelmaniam

Nextruder Nozzles are now available. Only $27.90 each plus $22.88 shipping to the good ol' USofA. Now if the Nextruder Heater Block assemblies would become available I could bundle all the parts I want. Note also that the Nextruder V6 adapter is now out of stock.

 

Sorry for my poor English. I try to do my best.

Publié : 19/04/2023 7:06 pm
addohm
(@addohm)
Estimable Member
RE: After Market nozzle

Must be nice 😀

Posted by: @manelto

I have added the 0.25 and the 0.6 to the MK4 kit. So I don't pay the postage.

Posted by: @voxelmaniam

Nextruder Nozzles are now available. Only $27.90 each plus $22.88 shipping to the good ol' USofA. Now if the Nextruder Heater Block assemblies would become available I could bundle all the parts I want. Note also that the Nextruder V6 adapter is now out of stock.

 

 

Publié : 20/04/2023 1:53 am
addohm
(@addohm)
Estimable Member
RE: After Market nozzle

Imma order my nozzles when MMU3 comes out.

Publié : 20/04/2023 2:01 am
Partager :