Notifiche
Cancella tutti
There is an object with no extrusions on the first layer
v2.3.1
Print Setting: 0.40mm quality
Filament: Prusament PLA
Printer: Prusa Mini+ 0.8 nozzle
^ all default from slicer
my mini+ is using 0.8 nozzle.
https://www.prusaprinters.org/prints/3710/files
Slicing -> sword-test-print.stl
it have the error ->> There is an object with no extrusions on the first layer
what could be wrong?
Thanks!
Postato : 01/01/2022 11:57 pm
This has very thin parts designed at about the limit of a 0.4mm nozzle. With a 0.8mm nozzle you are going to find it exceedingly difficult at best...
Cheerio,
Postato : 02/01/2022 1:32 am